0
In the early stages of the game you only have the choice of one single saber. If
you want to use the dual sabers or saber staff do the following:
1. Go to the "GameData\Base" folder
2. Open "jaconfig.cfg" in wordpad (wordpad sorts out the encoding making it
easier to read)
3. Go to the line which starts ' seta g_saber_type "single" '
4. Replace that line and the next 4 lines with the following:
If you want 1 single saber:
seta g_saber_type single
seta g_saber single_1
seta g_saber2 single_1
seta g_saber_color blue // change this color to what ever you want e.g. blue,
green, red
seta g_saber2_color blue // change this color to what ever you want e.g. blue,
green, red
If you want 2 single sabers:
seta g_saber_type dual
seta g_saber single_1
seta g_saber2 single_1
seta g_saber_color blue // change this color to what ever you want e.g. blue,
green, red
seta g_saber2_color green // change this color to what ever you want e.g. blue,
green, red
If you want the dual bladed saber staff (think Darth Maul):
seta g_saber_type staff
seta g_saber dual_2
seta g_saber2 dual_2
seta g_saber_color red // change this color to what ever you want e.g. blue,
green, red
seta g_saber2_color red // change this color to what ever you want e.g. blue,
green, red
5. From the main menu press [Shift]+[~] to access the console.
6. Type: map yavin1b (See the note at the bottom)
7. And your off...
NOTE: Do not start a new game otherwise the file is overwritten. This is the
first level that you actually play and this skips the overwrite when you select
the saber. If you have not chosen your character settings yet do this first,
start the game and then exit. Perform the actions above and when you start your
player settings will be there, enjoy! There is obviously a setting to change the
saber hilts however I cannot find it.
you want to use the dual sabers or saber staff do the following:
1. Go to the "GameData\Base" folder
2. Open "jaconfig.cfg" in wordpad (wordpad sorts out the encoding making it
easier to read)
3. Go to the line which starts ' seta g_saber_type "single" '
4. Replace that line and the next 4 lines with the following:
If you want 1 single saber:
seta g_saber_type single
seta g_saber single_1
seta g_saber2 single_1
seta g_saber_color blue // change this color to what ever you want e.g. blue,
green, red
seta g_saber2_color blue // change this color to what ever you want e.g. blue,
green, red
If you want 2 single sabers:
seta g_saber_type dual
seta g_saber single_1
seta g_saber2 single_1
seta g_saber_color blue // change this color to what ever you want e.g. blue,
green, red
seta g_saber2_color green // change this color to what ever you want e.g. blue,
green, red
If you want the dual bladed saber staff (think Darth Maul):
seta g_saber_type staff
seta g_saber dual_2
seta g_saber2 dual_2
seta g_saber_color red // change this color to what ever you want e.g. blue,
green, red
seta g_saber2_color red // change this color to what ever you want e.g. blue,
green, red
5. From the main menu press [Shift]+[~] to access the console.
6. Type: map yavin1b (See the note at the bottom)
7. And your off...
NOTE: Do not start a new game otherwise the file is overwritten. This is the
first level that you actually play and this skips the overwrite when you select
the saber. If you have not chosen your character settings yet do this first,
start the game and then exit. Perform the actions above and when you start your
player settings will be there, enjoy! There is obviously a setting to change the
saber hilts however I cannot find it.